Industry knowledge of sticker cutting plotter：

The installation steps for the font are as follows:

1. Unpack the packing box, first clean the cutting machine car fixing tape and anti-collision;

2. Connect the plotter and the power socket first with the supplied power cable;

3. Connect the cutting plotter and computer with the supplied communication cable;

4. Insert the knife seat or the pen holder into the cutting machine tool holder and tighten the fixed knife holder or the pen holder;

5, turn on the power;

6. Place the medium and lower the pressure roller (Note: the position of the pressure roller should be at the edge of the medium and ensure that the position does not deviate from the working area);

7. Set parameters (computer part setting: a, select model; b, selected port and set flow mode. Cutting plotter setting: a, set coordinate origin; b, adjust tool depth, etc.);

8, the plotter self-test;

9, through the computer to transmit data detection plotter, can output normally is ready.

Now you can send instructions to the computer to draw the work.

Leave a message now for more details about sticker cutting plotter!